The Main Drive Unit (a.k.a. Device) houses the motor and other electronics - it is not weather/waterproof so must be taken into a climate controlled area when not in use. TIP: Bring it with you even for breaks as it should not be left unattended or where the pup might gain unsupervised access to it.
All three main drive units (or devices) house the motor, electronics and pulley that moves the line.
The Chase device is powered by a power adapter that plugs into the wall. It is controlled using the free SwiftPaws app.
Home Original and Plus devices are battery powered.
- The legacy Original and Plus drives are controlled using the Legacy remote controller.
- The GEN3 Original and Plus drives are controlled using the free SwiftPaws app.
Both legacy and GEN3 (app controlled) home Original drives use an 11.1v - 3 cell LiPo battery pack
Both the legacy and GEN3 (app controlled) home Plus drives use a 14.v- 4 cell LiPo battery pack
The Chase and GEN3 (app controlled) drives are Bluetooth enabled and can be controlled using the optional Universal remote controller sold separately on our website.
NOTE: Only the drives shipped after June 27th can be controlled using the SwiftPaws app. Similarly, the new app controlled drives will not pair to the legacy remote controller.
See: