The Legacy remote controller syncs with the main drive and must remain withing 10-15 feet of the drive to maintain this connection. It ships already calibrated. It uses a replaceable CR123A battery which lasts 2 or more years. Do not use rechargeable batteries.
TURN IT ON
- Press the power switch once
- You'll feel three slight vibrations and the LED light will flash green
- The light will turn steady green once you move the control trigger in either direction
- The controller will remain on for 90 seconds.
THE AUTOMATIC SHUTDOWN SAFETY FEATURE
- At 80 seconds into a play session
- The remote controller will vibrate twice and
- The LED light will turn red for 10 seconds
- If you do nothing, the auto-shutdown safety feature engages.
TO BYPASS THE AUTOSHUTDOWN
- Press and hold the power switch during that 10 seconds until the LED light turns from green to red (it only takes a moment).
- The remote will vibrate twice and the light will turn green again - indicating the beginning of another 90 second play session
- We do not recommend bypassing the play session
- Instead - allow your pup to catch their breath and get some water and the motor of your drive to cool down before starting another session.
TO ENTER LOW SPEED MODE
- Turn on the remote by pressing the power switch
- Press the control trigger down and power switch once, quickly and release both at the same time
- It is now in Low Speed mode.
To stop low speed and return to normal speed:
- Turn off both the drive and remote.
- When you turn them back on you'll be back to normal speed.
Jun 11, 2025