Pounce Remote

There is a red LED at the top of the Pounce remote that lights up when you press any of the control buttons.

• If the LED does not come on at all
  • the battery may be loose, inserted backward (see illustration below), or needs to be replaced.
• If the LED is lighting but the drive is not responding:
  • Check the buttons; the soft rubber cover may slip under the edge of the hole and get stuck. Just pushing your finger around the button to release the pinched cover. 
• If the LED is blinking:
  • The battery is getting weak and needs to be replaced.

The Pounce remote uses a replaceable 23A (12-volt) lithium battery.

If the red LED begins to blink or the remote stops working, it’s time to replace the battery.