STEP 1
Download the SwiftPaws app. Select the appropriate app store for your phone:
STEP 2
Learn about the care of the LiPo battery. The LiPo battery delivers a lot of power and allows for longer play sessions on a single charge but they are not like the batteries you might be used to. They require specialized and specific care. Be sure to read all of the instructions and tips in the following articles:
- When and how much to charge Home Original battery
- Original Battery Voltages to Know
- Develop a Good Charging Habit
STEP 3
Charge the battery according to the instructions in the links above.
STEP 4
Test the equipment to make sure it's working - before setting up the course.
STEP 3
Set up the course.
The max course size is 200-300 feet, this range is for a course using the drive unit and a single field pulley. Your actual course size depends on multiple factors. Keep in mind that anything that adds drag to the system may require that the course be a bit smaller to accommodate this. See: How to determine your maximum course size
STEP 4
Adjust the line tension so that it is the very lightest tension possible. See this video that demonstrates a quick simple way to adjust for proper line tension.
STEP 5
Play! Keep your finger on the pawprint button in the app while you slide it up or down to control direction and speed. Lift your finger to stop.
PLAY SESSION
A play session is 90 seconds and shows as 1:30 in the app. It begins to count down as soon as you move the button. At the end of the play session the drive will stop. After your pup catches their breath and maybe gets some water, you can initiate a new play session. Breaks are important for both your pup and the equipment.
NOTE: Disconnect the battery when not actively playing, even for breaks as the drive may continue to drain the battery even with the power switch off. Bring the drive into a climate controlled area when not in use, it is not waterproof or weather proof.